Antminer S21e XP Hyd 3U — 860 TH/s for Professional Hydro Mining

Antminer S21e XP Hyd 3U is a Bitmain SHA-256 ASIC miner featuring a typical hashrate of 860 TH/s, hydro cooling and a 3U chassis. Its specified wall power consumption is 11,180W, with an efficiency of 13 J/TH at 35°C.

Designed for mining installations with suitable electrical and liquid-cooling infrastructure, this model brings 0.86 PH/s of mining capacity into a single unit.

860 TH/s per Miner

The 860 TH/s configuration provides substantial SHA-256 hashrate per unit, helping operators plan larger deployments around a clear hardware specification.

For capacity planning, 10 units represent a combined typical hashrate of 8.6 PH/s and specified miner wall power of 111.8 kW, before separately powered cooling and other site equipment.

13 J/TH Power Efficiency

The specified efficiency of 13 J/TH provides a useful basis for comparing electricity requirements across SHA-256 miners.

At the listed operating point, 860 TH/s corresponds to 11,180W of wall power. Actual operating performance depends on the installation environment, cooling conditions and machine configuration.

Hydro Cooling for Dedicated Mining Infrastructure

The S21e XP Hyd 3U uses liquid cooling to transfer heat to an external cooling system. This makes cooling-system compatibility an essential part of deployment planning.

Before installation, verify the required coolant specifications, inlet temperature, flow rate, pressure and connections using the documentation supplied for the exact unit. Cooling equipment should be sized for the total installation load.

3U Format for Organized Rack Deployment

The 3U chassis supports rack-based equipment planning. When designing an installation, account for mounting compatibility, plumbing, power distribution, cable routing and service access.

Deployment capacity should be determined by the rack’s physical limits together with available electrical power and cooling capacity.

SHA-256 Mining for BTC, BCH and BSV

The miner uses the SHA-256 algorithm and supports mining Bitcoin, Bitcoin Cash and Bitcoin SV through compatible mining configurations.

Coin selection depends on the configured pool and firmware. The listed coins are alternative mining options, rather than a promise of simultaneous rewards from all three networks.

Especificações Técnicas

Performance figures refer to the listed 860 TH/s configuration. Confirm the exact unit specifications and package contents before ordering.

Electricity Consumption for Deployment Planning

At a constant wall power of 11.18 kW, calculated miner electricity consumption is:

These calculations exclude separately powered cooling equipment and other site loads.

Daily miner electricity cost = 268.32 × your electricity rate per kWh.

Use total site consumption when assessing operating costs.

Who Is This Miner Suitable For?

The Antminer S21e XP Hyd 3U is suitable for buyers planning professional SHA-256 mining installations with dedicated power and hydro-cooling infrastructure.

Typical use cases include:

• Hydro-cooled Bitcoin mining farms.
• Hosting facilities with compatible liquid-cooling systems.
• Rack-based mining infrastructure projects.
• Fleet expansion where hashrate, electrical capacity and cooling capacity are planned together.

Perguntas Frequentes

What is the hashrate of the Antminer S21e XP Hyd 3U?

This configuration has a typical hashrate of 860 TH/s, equivalent to 0.86 PH/s.

Quanto consome de energia?

The specified wall power consumption is 11,180W at 35°C. At constant operation, this corresponds to approximately 268.32 kWh per day, excluding separately powered cooling equipment.

What does 13 J/TH mean?

It means the miner uses 13 joules of energy per terahash at the specified operating point. Lower J/TH values indicate less energy consumed for the same amount of hashing work under comparable conditions.

Que moedas pode minerar?

It supports SHA-256 mining for BTC, BCH and BSV through compatible pool and firmware configurations. It is not a Scrypt miner for Litecoin or Dogecoin.

Does it require an external cooling system?

Yes. It requires a compatible external liquid-cooling system. Confirm the required coolant, flow, pressure, temperature and connection specifications before deployment.

Can it run from a standard household outlet?

This model should be planned as professional mining equipment. Its specified load is 11.18 kW per unit. Confirm the exact input voltage, phase configuration, connectors and circuit requirements before installation.

Are cooling equipment and installation accessories included?

Package contents depend on the quotation. Contact PunkHash to confirm the included equipment, cables, fittings and any additional infrastructure required.

Source Your Antminer S21e XP Hyd 3U from PunkHash

PunkHash supplies ASIC mining hardware and supports buyers with product selection, quotation coordination and technical enquiries.

For a project quotation, send us your required quantity, delivery destination, available electrical capacity and cooling-system details. Our team can help clarify the equipment configuration and supply scope before ordering.

Request a Quote on WhatsApp