BTC96668.24USD
LTC87.36USD
DOGE0.18USD
DGB0.01USD
ETH1835.85USD
ETC17.14USD
CKB0.01USD
ALPH0.34USD
KAS0.1USD
>
PunkHash를 팔로우하면 최신 PunkHash 뉴스 및 공지사항과 PunkHash 서비스 또는 제품 업데이트에 대한 최신 정보를 받을 수 있습니다.
How to set up NerdMiner

Configuring the NerdMiner:

Which ever method detailed above you chose you will need to configure the device to connect to your Wi-Fi network
and enter a bitcoin address where you wish to receive your block reward to if your NerdMiner finds a block.

1. On your computer or mobile phone, connect to the Wi-Fi network provided by your Nerdminer device.
Note: the Wi-Fi should be 2.4GHz,can not be 5GHz. You can achieve this by either scanning the QR code displayed
on the screen or manually scanning for the Wi-Fi network and logging in using the credentials below:

The SSID is: NerdMinerAP:
The Password is: MineYourCoins

2. Open a web-browser, you should be automatically re-directed to a set-up page. If you aren’t automatically
re-directed simply manually navigate to 192.168.4.1 in a the browser.
you should see this screen:

3. Click the “Configure Wi-Fi” option and provide the requested information on the screen. This includes selecting
your Wi-Fi network, entering the Wi-Fi network password, and specifying the bitcoin address for receiving mined
bitcoin in the event of discovering a block, we suggest a seg-wit address starting bc1q (Note; taproot addresses
starting bc1p don't currently work with the default public-pool). The pool settings are pre-set to public-pool.io,but
you can customize them according to your preferences, though it’s usually advisable to keep the default settings.

The fields annotated with red text on the image below are the 3 fields you need to configure.

4. In the rare event that you discover a valid block, you will receive the full block reward to the address provided.
(excluding a small fee that will be directed towards the solo mining pool, this differs between pools but expect around 2%).

5. Once you have entered all the necessary information, click “Save,” wait for a moment, and then restart your device.

6. You should now be able to view the Nerdminer main screen. Where you should see how many KH/S your NerdMiner
is producing. (Expect around 55KH/S, may differ slightly depending on firmware) Use the buttons to navigate as
described below:


Top Button:

  • Single click: Enables screen switching (only functional with firmware version 1.5 or higher).
  • Press and hold for 5 seconds: Initiate a reset of your configurations and restarts the device.
  • Hold and power up: Activates the configuration mode, granting  access to modify the current configuration via Wi-Fi or adjust/verify settings.

Bottom Button:

  • Single click: Turns the screen off and on.
  • Double click: Alters the orientation (default is USB-C positioned to the right).

Centre Button:

  • Hard Reset: Caution! Only press this button if you intend to erase all data on your device.
TG 채널 구독최신 암호화폐 채굴 정보를 얻기
구독 제출
문의하기
D-2 Seri Gembira Avenue 58200 Kuala Lumpur
Lot 13, Adjacent 5, Green Park Urban Area,
Hai Xuan, Mong Cai, Vietnam
이메일 구독
+(60)116 999 5678
+(86)136 0801 8782
+(84)339 835 985
arvin.cn.work@gmail.com