Nexus S1-02- 10 TH/s Desktop Bitcoin Solo Miner – 2× BM1373

Nexus S1-02 is a desktop Bitcoin miner featuring two BM1373 ASIC chips, a rated hashrate of 10 TH/s ±5% and specified power consumption of 150W ±10%. It uses the SHA-256 algorithm and combines fan cooling with a built-in status display.

Designed for Bitcoin enthusiasts and hardware hobbyists, this upright model keeps its circuit board, cooling assembly and operating screen visible.

10 TH/s. Two BM1373 chips. Bitcoin mining on your desktop.

Nexus S1-02 10 TH/s Desktop Bitcoin Miner – 2× BM1373

Nexus S1-02: Key Features

10 TH/s of Dedicated Bitcoin Mining Power

The rated hashrate is 10 TH/s with a stated tolerance of ±5%, corresponding to approximately 9.5–10.5 TH/s. Dedicated ASIC hardware performs the SHA-256 hashing workload used in Bitcoin mining.

Actual readings may vary with operating settings and conditions.

Two BM1373 ASIC Chips

This configuration contains two BM1373 chips. The clearly identified chip model and quantity help buyers compare hardware configurations across the desktop mining range.

The machine is purpose-built for mining rather than general computing or graphics processing.

150W Specified Power Consumption

The supplied power specification is 150W ±10%, equivalent to approximately 135–165W. Based on the nominal figures of 150W and 10 TH/s, calculated efficiency is approximately 15 J/TH.

This calculation uses the supplied power specification. It is not a separately verified wall-power efficiency measurement.

Built-In Live Status Display

The integrated screen displays operating information including hashrate, temperature and device-reported power readings. Check key data directly on the machine while it runs.

Device-reported power and power measured at the outlet may differ. Use an outlet measurement when estimating the electricity consumption of the complete setup.

Fan Cooling and Visible Hardware

A front-mounted cooling fan and heatsink dissipate heat during operation. The exposed black circuit board, red cabling and orange fan give the product a distinctive appearance.

Keep the fan and heatsink unobstructed to maintain airflow around the cooling assembly.

Technical Specifications

Specifications describe the stated configuration. Actual performance and power consumption may vary with settings and operating conditions. The supplied 150W figure has not been separately identified as device power or wall power.

PunkHash | Solo Miner Manufacturer & OEM/ODM Services

PunkHash is a source manufacturer of Solo miners and desktop cryptocurrency mining hardware, with capabilities in product design, research and development, manufacturing and technical support. We provide OEM and ODM services for brands, distributors and project partners.

• OEM & ODM Customization — Custom branding, hardware design and user interface customization.
• Product Design & R&D — Product planning, engineering development and prototype testing.
• Manufacturing & Testing — Production, assembly and functional testing before delivery.
• 기술 지원 — Setup guidance, troubleshooting and after-sales technical assistance.

Discuss Your Solo Miner Project with PunkHash
Tell us your target specifications, customization requirements and order quantity.

💬 Contact PunkHash on WhatsApp for OEM/ODM Services →

Who Is This Desktop Miner For?

This model is intended for enthusiasts who want dedicated Bitcoin mining hardware with visible components and an integrated operating display. It can also be used for demonstrations and learning about ASIC mining.

For buyers comparing desktop models, hashrate is only one part of the decision. Consider power requirements, operating noise, cooling, supported firmware and package contents before choosing your configuration.

Preparing Your Setup

Place the unit on a stable surface with sufficient ventilation. Keep exposed components away from liquids and accidental contact, and leave clear space around the cooling fan.

Before ordering, confirm the required power supply, included accessories, network connection method and supported mining settings with PunkHash.

For electricity budgeting, measure the complete setup at the outlet. Daily consumption in kWh equals measured wall power in watts divided by 1,000, multiplied by the number of operating hours.

Frequently Asked Questions

What is the Nexus S1-02?

It is a desktop Bitcoin ASIC miner with two BM1373 chips, a rated hashrate of 10 TH/s ±5% and specified power consumption of 150W ±10%.

Which algorithm does it use?

It uses SHA-256 for Bitcoin mining. It is not designed for Litecoin’s Scrypt algorithm.

How many ASIC chips are installed?

The specified configuration contains two BM1373 ASIC chips.

What does 10 TH/s ±5% mean?

It describes a nominal hashrate of ten trillion hashes per second, with a stated tolerance corresponding to approximately 9.5–10.5 TH/s.

Is 150W the wall-power consumption?

The supplied specification states 150W ±10% without identifying the measurement point. Confirm the measurement basis or use an outlet power meter before calculating electricity costs.

What is its calculated power efficiency?

Using the nominal specifications, 150W divided by 10 TH/s equals approximately 15 J/TH. Actual efficiency should be calculated using power and hashrate measured under the same operating conditions.

Does this model use liquid cooling?

No. The pictured configuration uses a cooling fan and heatsink.

What does the display show?

The built-in screen provides operating information including hashrate, temperature and device-reported power readings.

Can it be used for solo mining?

Confirm the supplied firmware, solo-mining support and compatible pool settings with PunkHash before ordering.

Is the power supply included?

Contact PunkHash to confirm package contents, power-supply specifications and accessories for your order.

Pricing and Ordering

Contact PunkHash for current Nexus S1-02 pricing, availability and shipping options. Include your required quantity and delivery country to request a quotation for your setup or distribution needs.

Contact PunkHash at www.punkhash.com