Bitaxe Gamma 602 – 1.8 TH/s 데스크톱 비트코인 채굴기, 25W

Bitaxe Gamma 602: Discover Desktop Bitcoin Mining

Bitaxe Gamma 602 is a desktop cryptocurrency miner featuring one BM1370 ASIC chip, a specified hashrate of 1.8 TH/s and rated power consumption of 25W. It uses the SHA-256 algorithm for mining Bitcoin and other compatible SHA-256 cryptocurrencies.

The pictured configuration combines an orange desktop stand, an exposed circuit board, an onboard display and a fan-cooled heatsink with copper heatpipes. It brings dedicated mining hardware into a format suited to hands-on learning and desktop demonstrations.

1.8 TH/s from One BM1370 ASIC Chip

A single BM1370 chip provides dedicated SHA-256 processing with a specified total hashrate of 1.8 TH/s.

This single-chip configuration gives enthusiasts a practical way to explore ASIC mining and observe how operating settings, cooling and power consumption affect performance. Actual hashrate depends on the supplied configuration and operating conditions.

25W Rated Power Consumption

The rated power consumption is 25W. At that operating point, continuous use corresponds to approximately:

• 0.6 kWh per day over 24 hours.
• 18 kWh per 30 days of continuous operation.
• 13.89 J/TH calculated nominal efficiency, based on 25W divided by 1.8 TH/s.

These calculations use the supplied specifications. The power measurement point has not been identified, so actual wall-outlet consumption may differ, including any power-supply losses.

SHA-256 Mining for BTC and BCH

The miner is designed for SHA-256 processing. Mining targets include Bitcoin (BTC), Bitcoin Cash (BCH) and other compatible SHA-256 coins, depending on the installed firmware and selected pool.

Support for multiple SHA-256 coins describes compatible mining targets. It does not mean that the machine delivers 1.8 TH/s independently to several networks at the same time.

Fan Cooling with Copper Heatpipes

The pictured cooling assembly combines a fan, heatsink and copper heatpipes to move heat away from the mining hardware. The orange stand supports the board in an upright desktop position.

Keep the fan intake and heatsink unobstructed during operation. A stable surface and adequate surrounding airflow help the cooling assembly work as intended.

Onboard Display and Visible Hardware

The integrated display provides an on-device interface for operating information. Available readings and controls depend on the installed firmware.

The exposed hardware layout also makes the board and cooling components visible, giving the unit a distinctive appearance for mining enthusiasts, workbenches and demonstrations.

Technical Specifications

Coin and pool compatibility depend on the supplied firmware and configuration.

Frequently Asked Questions

What is Bitaxe Gamma 602?
Bitaxe Gamma 602 is a desktop SHA-256 miner with one BM1370 ASIC chip, a specified hashrate of 1.8 TH/s and rated power consumption of 25W.

Which coins can it mine?
It is designed for BTC, BCH and other compatible SHA-256 coins. Confirm support for your intended coin and pool with the supplied firmware.

Can it mine Litecoin or Dogecoin?
No. Litecoin and Dogecoin use Scrypt, while this device uses SHA-256.

How much electricity does it consume?
At a constant 25W, the miner uses approximately 0.6 kWh per day. Actual wall-outlet consumption depends on operating conditions and whether power-supply losses are included in the stated rating.

Can it be used for solo mining?
Solo mining requires compatible firmware and a suitable solo pool or node configuration. Confirm the supplied setup with PunkHash. Solo mining does not guarantee a block reward.

Does the package include a power supply?
Package contents depend on the selected purchase option. Contact PunkHash to confirm the power supply, plug type and included accessories.

Get a Quote for Bitaxe Gamma 602

Send PunkHash your required quantity and delivery country to confirm pricing, availability and package contents.

Contact PunkHash About Bitaxe Gamma 602 →

PunkHash | Solo Miner Manufacturer & OEM/ODM Services

PunkHash is a source manufacturer of Solo miners and desktop cryptocurrency mining hardware, with capabilities in product design, research and development, manufacturing and technical support. We provide OEM and ODM services for brands, distributors and project partners.

• OEM & ODM Customization — Custom branding, hardware design and user interface customization.
• Product Design & R&D — Product planning, engineering development and prototype testing.
• Manufacturing & Testing — Production, assembly and functional testing before delivery.
• 기술 지원 — Setup guidance, troubleshooting and after-sales technical assistance.

Discuss Your Solo Miner Project with PunkHash
Tell us your target specifications, customization requirements and order quantity.

Contact PunkHash on WhatsApp for OEM/ODM Services →