Nexus S1 – 15 TH/s Desktop-Bitcoin-Solo-Miner – 4× BM1373-ASIC-Chips

Nexus S1 is a desktop Bitcoin miner powered by four BM1373 ASIC chips. It delivers a rated hashrate of 15 TH/s ±5% using the SHA-256 algorithm, with specified power consumption of 240W ±10%. Fan cooling and a built-in status display combine dedicated mining hardware with visible operating information.

Designed for Bitcoin enthusiasts and hardware hobbyists, this upright desktop model offers a hands-on way to explore ASIC mining.

Nexus S1: Key Features

Nexus S1 15 TH/s Desktop-Bitcoin-Miner – 4× BM1373-ASIC-Chips

15 TH/s of Dedicated Mining Power

A rated hashrate of 15 TH/s provides dedicated computing power for Bitcoin mining. The stated ±5% tolerance corresponds to approximately 14.25–15.75 TH/s. Actual readings may vary with operating settings and conditions.

Four BM1373 ASIC Chips

The hardware configuration includes four BM1373 ASIC chips. Unlike a general-purpose computer, this machine is built for a specific hashing workload: SHA-256 mining.

Clearly identified chips and performance specifications help buyers compare hardware configurations before choosing a desktop miner.

240W Specified Power Consumption

The supplied power specification is 240W ±10%, corresponding to approximately 216–264W. At the nominal figures of 240W and 15 TH/s, calculated efficiency is approximately 16 J/TH.

The power measurement basis has not been separately identified as device power or wall power. For electricity budgeting, use a measured outlet reading for the complete setup, including its power supply.

Integrierte Statusanzeige

The integrated screen presents operating information directly on the machine. It provides a convenient way to check mining activity and key readings while keeping the hardware visible on your desk.

Fan Cooling and Distinctive Desktop Design

Fans and a heatsink assembly dissipate heat during operation. The exposed board, front-mounted cooling components and orange-and-red styling give the unit a recognizable appearance.

Position the machine where airflow remains unobstructed. Fan cooling produces operating noise, so placement should account for both heat and sound.

Technische Daten

The efficiency figure is calculated from nominal specifications, not from a separate wall-power test. Performance and consumption depend on configuration and operating conditions.

Für wen ist dieser Desktop-Miner gedacht?

This model is intended for enthusiasts who want dedicated Bitcoin mining hardware with an integrated display and visible components. It can also be used for hardware demonstrations and learning about ASIC operation.

When comparing products, consider more than hashrate alone. Power requirements, cooling, operating noise, supported firmware and included accessories all affect the suitability of a machine for your setup.

Vorbereitung Ihrer Einrichtung

Choose a stable surface with sufficient ventilation. Keep the exposed components away from liquids and accidental contact, and avoid blocking the fans or heatsink.

Before ordering, confirm the required power supply, package contents, network connection method and supported mining configuration. These details help ensure that the delivered unit matches your intended installation.

For electricity estimates, measure the complete setup at the outlet. Daily consumption in kWh equals measured wall power in watts divided by 1,000, multiplied by operating hours.

Häufig gestellte Fragen

What is the Nexus S1?

It is a desktop Bitcoin ASIC miner with four BM1373 chips, a rated hashrate of 15 TH/s ±5% and specified power consumption of 240W ±10%.

Which mining algorithm does it use?

Es nutzt SHA-256 für das Bitcoin-Mining. Es ist nicht für den Scrypt-Algorithmus von Litecoin ausgelegt.

How many chips are installed?

The specified configuration contains four BM1373 ASIC chips.

Is 240W the wall-power consumption?

The supplied specification states 240W ±10% without identifying the measurement point. Confirm this detail before estimating electricity costs, or measure the complete setup at the outlet.

What does the hashrate tolerance mean?

The ±5% tolerance around 15 TH/s corresponds to approximately 14.25–15.75 TH/s. It describes the stated performance range rather than an additional operating mode.

Verfügt dieses Modell über eine Flüssigkeitskühlung?

No. The pictured configuration uses fans and a heatsink assembly.

Kann man damit Solo-Mining betreiben?

Confirm the supplied firmware, solo-mining support and compatible pool settings with PunkHash before ordering. Available configurations should be checked for the specific unit.

Ist das Netzteil im Lieferumfang enthalten?

Contact PunkHash to confirm package contents and the power-supply requirements for your order.

Ask About Availability and Ordering

Interested in the Nexus S1 for your own setup or product lineup? Contact PunkHash with your required quantity and delivery country to request current pricing, availability, package details and shipping options.

Kontaktieren Sie PunkHash unter www.punkhash.com